Your roadmap to the world of ...

BSM 83 HD + TFD 290 + SPR 300 - Semi-automatic brush segment machine    Brush samples | Request offer

BSM 83 HD + TFD 290 + SPR 300

+ high variation – from normal to high density segments
+ perfect fill distribution – high balancing
+ minimum loss of material
+ manual or automatic fill material feeding
+ nominal diameters from 1.1" to 7.1" (28 - 180 mm)
+ outer segment diameter up to 15.75" (400 mm)

Brush segments with extra high density and automatic wire feeding

The BSM 83 HD together with TFD 290 and SPR 300 produce pressed brush segments with crimped wire or abrasive fill in normal to high densities.

The TFD 290 cuts hanks to the required length from spool, feeds the fill material into cartridges and transports these to the BSM 83 HD. Brushes of different fill lengths in the same nominal size can be easily selected and produced thanks to the recipe management.

The BSM 83 HD automatically loads the revolver with the fill material cartridges. The ring and eyelet are manually placed and the production process started.

The BSM 83 HD inserts the fill material very evenly distributed between ring and eyelet and clamps the wire firmly by initial pressing.

The wire feeding is specially designed for an even wire distribution in the segment, ensuring a good balance quality of the finished brush. Wire usage is actively cut by setting the cut length precisely for each brush size. The prefabricated segment is taken from the BSM 83 HD and placed in the SPR 300 for automatic final pressing and trimming.

The roller cutter station is specially designed for trimming brush segments and ensures an even round trim for a good balance quality. Various different outer diameters can be easily set on the SPR 300.

The combination of the BSM 83 HD with the automatic fill feeding TFD 290 and the SPR 300 for final pressing and trimming offers a great lead in efficiency in the batch production of brush segments ready for assembly.

The brush segments can be directly further processed, the individual configuration of fill density and fill length making them the ideal base product for a great diversity of brushes.


Optional equipment

Fill material preparation
• Roller cutter GR 90
• Bundle cutter BC 100
• Wire crimping and winding machine STW 87 or STW 96
• Wire crimping machine USTW 6000 and hank spooling device STS 460
• Wire cutting machine SWC 950

Fill material feeding
-> Picker AAB 937
-> 2 stations coil holder SFG 91

Start today with the Semi-automatic brush segment machine BSM 83 HD + TFD 290 + SPR 300 into a successful future!

We're very approachable and would love to speak to you. Feel free to call 0049 29 53 - 73 300, send us an email [email protected] or simply complete the enquiry form.

* mandatory field

Copyright © 2017 WÖHLER Brush Tech GmbH | All rights reserved