Your roadmap to the world of ...

MTB 1000 - Trimming bench    Brush samples | Request offer

MTB 1000

• up to 39.4" (1000 mm) diameter
• trim length up to 8.2 ft (2.5 m) or up to 16.4 ft (5.0 m)
• CNC contour trimming
• simple upload of G-Code-programs
• fast trimmer change
• quick clamping system for efficient brush loading

Innovative machine design – any contours

]A particularly robust welded steel frame forms the backbone of the MTB 1000. The machine concept of the MTB 1000 has been optimised for brush manufacturers and comprises sliding doors, allowing the easy loading of roll brushes either by crane from above or directly from the front. The trimmer can be tilted by 90°, allowing the effective trimming of disk brushes too.

The quick clamping system for loading brushes consists of the chuck on the drive side right and der pneumatically operated tailstock centre on the left.

The tailstock is electrically driven for easy operation.
Cut waste is collected in easily emptied waste trays and all guide elements are effectively protected against soiling.

Standard programs are already installed for trimming roll brushes with cylindrical, concave and convex contours,
as well as disk brushes.
A CNC control with touch screen allows CNC (socalled G-function) data to be processed and any required contour trimmed. G-function data can be readily loaded from any CAM program.
A large program memory is available for recipe management.

The MTB 1000 is available in two models with a loading length of 9.8 ft (3.0 m) and 17.4 ft (5.3 m).


Optional equipment

• Trimmer FS 930
• Angle trimmer WFS 930

Start today with the Trimming bench MTB 1000 into a successful future!

We're very approachable and would love to speak to you. Feel free to call 0049 29 53 - 73 300, send us an email [email protected] or simply complete the enquiry form.

* mandatory field

Copyright © 2017 WÖHLER Brush Tech GmbH | All rights reserved