TU 900 - Roll and disc brush trimming machine Brush samples | Request offer
+ brush diameter up to 3.3 ft (1 m)
+ brush weight up to 3.300 lbs (1.5 t)
+ standard lengths up to 6.6 ft (2.0 m) (optionally up to 19.0 ft (5.8 m))
+ proven FS 930 trimming technology
+ contour trimming (optional)
+ disc brush trimming (optional)
+ chip extraction and cleaning-friendly design
Cost-efficient trimming of staple set and wound roll and disc brushes with synthetic or natural fill
The TU 900 is an operated machine for the final trimming of roll brushes in diameters up to 1,000 mm. The proven and durable FS 930 trimming technology reliably trims brushes with synthetic filaments, natural fibres or abrasives with high accuracy to the required diameter.
The TU 900 standard configuration is designed for trimming brushes with cylindrical form. If wavelike contours are required, then the TU 900 can be optionally upgraded to include the jig trimming function. Individual contour jigs can be easily changed.
The trimming of wire fill is ruled out for safety reasons.
Thanks to the simple, open design with brush drive, trimmer support and moveable tailstock the roll brushes can be easily fitted and removed using an existing crane or forklift. The most common shaft and tube diameters can be safely clamped and held outside or inside by the 3-jaw chuck on the tailstock. Alternatively the brushes can be held in an optional tailstock centre.
The 3-sided safety fence and a light curtain on the access side prevent unauthorised access to the operating area during trimming. Set-up work is made using control elements within the TU 900. The queried chuck guard on the tailstock even fulfils the Type C Standard requirements for lathes.
The integrated chip extraction RG 301 collects most chips directly where they are generated at the FS 930, carrying them out of the machine and into a collection container.
The operator only has to change the brushes and mechanically set the required diameter and trimming lengths.
The pre-selected settings like trimmer feed and brush rotational speed are electronically controlled.
• Contour trimming with jig
• Disc brush trimming
• WFS 930 for tight radii
We're very approachable and would love to speak to you. Feel free to call 0049 29 53 - 73 300, send us an email [email protected] or simply complete the enquiry form.