NEUIGKEITEN

The fully automatic dental and polishing brush machine WÖHLER DBM 400 is used for the production of small end brushes from Ø 3.6 mm without cup up to Ø 6 mm with cup. Brush types with mandrel, with screw thread and short forms without mandrel can be processed. The automatic metal part separation and feeding […]

The Wöhler TU 400 is a compact machine for finishing twisted-in wire brushes. It can be flexibly equipped with up to two processing units. Compact belt grinder, trimming unit for cylindrical brushes (Mini cutter MFS 940) and trimming unit for conical or contoured brushes (angle milling cutter WFS 87) can be freely combined. In the basic version, the operator manually clamps a twisted […]

The Wöhler gutter broom machine GB 100 is the evoltion of gutter broom production – it sets a new standard in the production of sweeper brushes. State-of-the-art, servo-controlled drives replace the hydraulics and swivel gears of the previous generation. This has more than doubled production output and drastically reduced maintenance costs. Dynamics, reproducibility and machine availability are […]

The HDT 42 is an assembly machine with special holders for tools for brush segment production as well as increased speed to increase production. The HDT 42 is used for the production of street sweeping rings at high speed and safe two-hand operation. Brush segments up to an outer diameter of 3.3 ft (1 metre) […]

The assembly machine for brush segment HDT 30 offers special holders for tools for brush segment production as well as increased speed to increase production. The assembly machine for brush segment production HDT 30 enables easy insertion of the welded strips as they can be produced with the PVM 100. The machine is equipped with […]

The PVM 100 is a production line for roller brush segments for road sweepers. Starting from the basic equipment, it can be configured for all fill and profile combinations. Depending on the equipment, mats made of polypropylene, wire mats, mats made of a polypropylene-wire mixture or plastic solid profile mats can be produced. The basic configuration consists […]

With the WCB 200 wire bundling machine, wire bundles with a cutting length of 40 mm to 270 mm can be cut from strands of crimped, fine crimped or smooth wire. Flat wire up to 1.1 mm width and 0.25 mm thickness can also be processed. Due to the simple and quick change of the cutting […]