Twist knot brush machine ZVA 600
Flexible in large and small series
Highlights
+ high production capacity
+ ideal for operating in production cells
+ brush size from 6-hole disks up to 23.6" (600 mm) outer diameter
+ automatic disc feeding (optional)
+ integrated hole punching (optional)

Highly flexible, fully automatic twist knot machine for everything from small production lots up to large series. Knot filling and punching is done on one station, to ensure exact positioning of the twist knot holes. The machine covers the full range of brush sizes from large to small. Discs up to 5.9″ (150 mm) in diameter can be automatically fed from magazine, larger disks can be fed by hand. Discs up to 17.7″ (450 mm) diameter can be processed.
By default the use of pre-punched disks is required. With the additional option of hole punching on the machine, the knoting and punching takes place at one station. This ensures an exact positioning of the holes.
The mechanical adjustment parameters are recorded and displayed on the touch screen of the compact operator terminal. The production parameters can be entered manually or retrieved from the internal memory as a program. The WÖHLER ZVA 600 has a USB port for backup, management and transfer of program data.
The twisting unit is able to generate many different shapes of knots. Such as Stringer Bead Twist, Cable Twist, Rose Bud Twist and Stringer Bead with Tight Rose Bud. Even individual knot forms are possible. Moreover it convinces with minimal wire loss.
The material is fed through the automatic wire feeding. Also a multi-spool feeding is possible.



Optional modules
Fill material feeding
• Wire uncoiler SDA 2 resp. SDA 4
• Wire uncoiler DAZ 80 + coil holder SFA 360
Additional module
• Hole punching unit
• Disk magazine
CONTACT US
Inquiries
+49 29 53 - 73 300
Aftersales / Spare parts
+49 29 53 - 73 300
Technical support
+49 29 53 - 73 333